Rendagrip - 10 Litre.
Rendagrip is an extra grip render bonding agent that contains a fine aggregate to provide an improved key before applying render on external surfaces (Concrete, lightweight blocks & brickwork). The fine aggregates are suspended in a unique waterproof polymer to ensure easy application by roller or brush and an even spread of aggregate avoiding any weak spots in the key coat and preventing the aggregate particles from coming loose during application. Rendagrip reduces the porosity or suction of the base substrate and provides a mechanical key from the fine aggregate suspended within the product. Extra Grip Render Bonding Agent. For use on concrete, lightweight blocks and brickwork. Contains a fine aggregate to improve render key. One coat application - render when dry. Red colour to indicate coverage. Reduces suction on porous substrates. Improves adhesion on smooth substrates. Can be applied to damp surfaces. Waterproof. Use as a bonding agent for render to concrete, brickwork and blockwork. As a bonding agent to improve adhesion to smooth surfaces. Do not use in areas subject to constant damp. Do not dilute. Do not apply below +5C (or allow to cure below this temperature). Remove splashes immediately from surrounding areas, do not allow to dry. Do not exceed a maximum depth of 25mm for complete render system. Always carry out a test patch prior to full scale application. All surfaces must be clean, sound and dust free. STIR WELL BEFORE USE. Ensure ambient temperature is above 5C. Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support. Use 1 coat only. Apply using a short pile roller or brush to give an even coating. Rendagrip is coloured RED to help avoid missing any areas. Protect adjacent surfaces from splashes and remove any Rendagrip with warm water before drying. Allow to dry thoroughly before applying render (usually 6 hours minimum). Drying time will be significantly extended at low temperatures.Coverage Approximately 3m2 per Litre depending on porosity of substrate. It is the users responsibility to determine suitability for use. Store in cool dry conditions away fron direct sunlight. Do not store below 5C or allow to freeze.